|
| |
| | RFC 1559 (rfc1559) - DECnet Phase IV MIB Extensions |
 | | DECnet Phase IV objects have been defined to be used in conjunction with the Internet MIB to allow access and control of these new objects by the Internet community. |  | | In this document, EXECUTOR is intended to reference only the DECnet software and is not intended to effect any other protocols which may be running on the system. |  | | These -- counters latch at their maximum specified value until either -- the system is restarted, or they are reset to zero by the user -- or management software. |
|
http://www.faqs.org/rfcs/rfc1559.html
(5081 words)
|
|
| |
| | DECnet for Linux FAQ |
 | | DECnet for Linux is only really of use to you if you have OpenVMS machines, or other machines that use DECnet, on your site. |  | | DECnet is implemented in terms of the Berkeley sockets API used for TCP/IP so the same techniques for socket/bind/connect etc apply to DECnet too. |  | | DECnet was designed by Digital as a way to interconnect their range of products. |
|
http://linux.dreamtime.org/pub/linux/decnet/faq.html
(5595 words)
|
|
| |
| | [No title] |
 | | DECnet for OpenVMS AXP: A Case History 1 Abstract The DECnet for OpenVMS AXP networking software facilitates the integration of OpenVMS AXP systems into existing DECnet computing environments. |  | | DECnet for OpenVMS AXP Components This section describes the major DECnet for OpenVMS AXP components and lists the porting issues relevant to each.[2] Figure 1 shows the interconnection of the various components of the DECnet for OpenVMS AXP software. |  | | Each time new DECnet for OpenVMS AXP images or test procedures had to be added to the shared disk during a test or debug session, the Alpha AXP test system had to be stopped, the disk mounted on the VAX system, images copied, the disk dismounted, and the Alpha AXP system rebooted. |
|
http://www.hpl.hp.com/hpjournal/dtj/vol4num4/vol4num4art11.txt
(7958 words)
|
|
| |
| | DECnet (Linktionary term) |
 | | DECnet interconnects Digital PDP and VAX minicomputers systems as well as desktop personal computers and workstations. |  | | DECnet Phase III implemented many advanced networking features, including adaptive routing that could detect link failures and reroute traffic as necessary. |  | | In 1980, Digital, Xerox, and Intel announced Ethernet as a way to interconnect computer systems. |
|
http://www.linktionary.com/d/decnet.html
(490 words)
|
|
| |
| | DECnet & OSU |
 | | The DECnet object is the program or procedure that is activated at the target system inside of a network-mode process to interact with the HTTP server. |  | | DECnet automatically caches and re-uses netserver processes, whereas there were well-known performance problems with spawning sub-processes. |  | | DECnet scripts have a DECnet node and task specification string as part of the mapping rule. |
|
http://cc.usu.edu/doc/scripting/scripting_0700.html
(2857 words)
|
|
| |
| | RFC 1405 (rfc1405) - Mapping between X.400(1984/1988) and Mail-11 (DECnet |
 | | This document covers mainly the O/R address to DECnet from/to address mapping (and vice versa); other mappings are based on RFC 1327 and its eventual future updates. |  | | Another important aspect of the problem is the coexistence of many disjoint DECnet networks, using the same DECnet address space, i.e., common X.400 and/or RFC822 mailing system acting as glue to connect different isolated Mail-11 islands. |  | | Considering the case where a message is relayed between two X.400 MHS via a DECnet network this could result in a nearly complete loss of information. |
|
http://www.faqs.org/rfcs/rfc1405.html
(3182 words)
|
|
| |
| | The DECnet Phase IV Specifications |
 | | The first change to the architecture would be to not have a DECnet Phase IV system change the Ethernet physical address of the machine. |  | | MOP is used to downline load software to routers and servers, even servers that don't run DECnet. |  | | It is a model for DECnet implementations of Network Management software. |
|
http://ftp.digital.com/pub/DEC/DECnet/PhaseIV
(1541 words)
|
|
| |
| | DECnet for Linux |
 | | Steve's DECnet programming pages which detail the interface to the DECnet functionality in the kernel. |  | | Man pages for all the programs and most library interfaces are available in the source and binary packages as well as some (rather cursory) set up documentation. |  | | It is also possible to display Linux X programs on a VMS workstation using DECnet. |
|
http://linux-decnet.sourceforge.net
(685 words)
|
|
| |
| | DECnet-Plus for OpenVMS |
 | | DIGITAL recommends using host-based routers to replace DECnet Phase IV host-based routers or in environments not requiring high throughput. |  | | To use DECnet-Plus for OpenVMS or DECnet Phase IV software, you need the appropriate software licenses. |  | | An OpenVMS cluster configuration is an organization of OpenVMS operating systems that communicate over a high-speed communications path and share processor resources as well as disk storage. |
|
http://www.cuis.edu/doc_vms_html/000000/731final/6501/6501pro_001.html
(1782 words)
|
|
| |
| | GLoC/DECnet Interface |
 | | The DECnet API I have in mind is described in more detail below. |  | | Note that the conversion program could be targeted equally easily to either the VAX or a "DECnet on UNIX" workstation. |  | | Buy a third-party "DECnet on Unix" library (Ki NETWORKS' DNA) which we will use to write DECnet-TCP/IP conversion software. |
|
http://www.geonius.com/writing/epoch/gloc.html
(1961 words)
|
|
| |
| | DECnet-Plus |
 | | DECnet-Plus software is compatible with DECnet Phase IV software; DECnet-Plus systems can coexist with and fully interoperate with Phase IV nodes. |  | | DECnet programming interfaces $QIO and $IPC also provide long name support. |  | | This manual provides an overview of the transition and planning tasks necessary to move from DECnet for OpenVMS (Phase IV) to DECnet-Plus for OpenVMS (Phase V) and DECnet/OSI for Digital UNIX. |
|
http://www.myths.com/pub/doc/oldvms/PLAN_PROFILE.HTML
(2976 words)
|
|
| |
| | SUNY'S DECNET/OSI IMPLEMENTATION PLAN |
 | | DECnet APPLICATIONS USING TCP/IP Two systems that are upgraded to DECNet/OSI 6.1 or greater it will be able to use TCP/IP instead of NSP or OSI to run sessions that we have always thought of as "DECnet". |  | | Bay Networks (was Wellfleet) does have OSI software, and we have been testing it in ever-improving versions over the last year. |  | | As customers using DEC computers, we knew that migration to "DECnet Phase V" would be necessary in order to keep up with DEC's offerings and that Phase IV would be only supported for a short time. |
|
http://www.sunybroome.edu/~hatala_j/osi.htm
(2751 words)
|
|
| |
| | Network World: Digital continues to enhance DECnet/OSI; Future unclear |
 | | This capability, which is currently supported in DECnet Phase IV, will allow DECnet/OSI end systems to trace the path of an incoming packet back to the sending end node instead of requesting path information from its designated router, as is necessary today. |  | | Besides obviating the need to use only DECnet/OSI routers, SINNERS will also provide better support for third-party DECnet routers from firms such as Cisco Systems, Inc. and 3Com Corp., which support ships-in-the-night routing as well as Integrated Routing. |  | | Also in the works for DECnet/OSI is a feature called Reverse Path Caching. |
|
http://findarticles.com/p/articles/mi_qa3649/is_199407/ai_n8717968
(677 words)
|
|
| |
| | [No title] |
 | | DECnet routing supports multiple independent DECnet networks attached to the router. |  | | To configure your DECnet router to perform routing over SMDS, refer to Chapter 39. |  | | Log on to the system with Network Manager privilege and set up the ports and paths of your bridge/router according to the procedure in Chapter 1. |
|
http://support.3com.com/infodeli/tools/bridrout/u_guides/html/nb91/operation/decrouter.op1.html
(849 words)
|
|
| |
| | Chapter 11. Using NetVisualyzer in a DECnet Environment |
 | | The last 2 bytes of the physical address is the DECnet address swapped byte for byte. |  | | You can use NetVisualyzer tools (such as NetLook and Analyzer) with DECnet as well as LAT&; protocols. |  | | 4DDN is a Silicon Graphics software option that connects IRIS workstations and servers to a DECnet network. |
|
http://techpubs.sgi.com/library/dynaweb_docs/0530/SGI_Admin/books/NetVis_UG/sgi_html/ch11.html
(565 words)
|
|
| |
| | DECnet - OneLook Dictionary Search |
 | | DECnet : Free On-line Dictionary of Computing [home, info] |  | | DECnet : Butterfly Glossary (networking terminology) [home, info] |  | | Tip: Click on the first link on a line below to go directly to a page where "DECnet" is defined. |
|
http://www.onelook.com/cgi-bin/cgiwrap/bware/dofind.cgi?word=DECnet
(98 words)
|
|
| |
| | DECnet |
 | | DECnet is generally used to communicate with and among FAX machines on the NIH campus. |  | | The DECnet protocol comes built in on machines from Digital Equipment Corporation. |
|
http://www.cit.nih.gov/dnst/handbook/implement/decnet.htm
(37 words)
|
|
| |
| | DECnet-Plus |
 | | The decnet_register tool is available to help you create these entries in the distributed namespace. |  | | The DECnet-Plus software includes a tool, decnet_register, to help you create and manage node information in DECdns and the Local namespace. |  | | The DECnet configuration procedure starts the tool automatically after creating a new namespace. |
|
http://www.cuis.edu/doc_vms_html/000000/731final/6495/6495pro_008.html
(3216 words)
|
|
| |
| | DECNET |
 | | DECNET is an information network focused on the decentralization of water/wastewater institutions. |  | | To subscribe to the mailing list, send an email to: |
|
http://www.crosslink.net/~ehp/decnet.htm
(300 words)
|
|
| |
| | DECnet-Plus |
 | | Readers of this book are expected to have a basic understanding of DECnet and OSI networking concepts. |  | | FTAM file does not look correct (OpenVMS only) |  | | DECnet Phase IV circuit names are based on the hardware type used by the lines connecting nodes. |
|
http://www.myths.com/pub/doc/oldvms/PS_PROFILE.HTML
(1985 words)
|
|
| |
| | OpenVMS: DECnet Access Method : SAS/SHARE |
 | | DECnet (an acronym for Digital Equipment Corporation's Networking architecture) is an example of an access-method-id. |  | | See SAS/SHARE Variables for information about setting the SASSECUR variable. |  | | Assign the name of the server's node to a SAS macro variable, then use the name of the macro variable for node in the two-level server name. |
|
http://www.okstate.edu/sas/v7/sashtml/books/accmeth/z0381620.htm
(1209 words)
|
|
| |
| | Debian -- libdnet |
 | | This package contains the libraries necessary for a functioning DECnet system. |  | | Most DECnet programs require these libraries to be present on the system. |  | | The libraries are: libdnet - the basic DECnet API as featured on Ultrix(R) systems libdnet_daemon - useful calls for writing DECnet daemons libdap - DAP (Data Access Protocol) C++ classes librms - High level library for programmatic access VMS files |
|
http://packages.debian.org/unstable/libs/libdnet.html
(181 words)
|
|
| |
| | [No title] |
 | | DECnet/OSI and DECnet Phase IV systems coexist transparently in a single network. |  | | Previous purchase of DECnet or DECnet/OSI does not convey the right to use new software versions. |  | | Either the applications would need to be rewritten for a new protocol or the existing protocol would need to continue to be maintained on the backbone. |
|
http://ftp.digital.com/pub/Digital/DECnet/OSI/sales-update-article.txt
(706 words)
|
|
| |
| | DECnet-Plus for OpenVMS |
 | | If you are already using a namespace created with Version 1 of the VAX Distributed Name Service (DNS) (running on DECnet Phase IV), you can continue to use the namespace when you upgrade your networking software to DECnet-Plus for OpenVMS. |  | | However, because of differences in the way that DNS Version 1 and DECdns Version 2 handle access control, you must prepare your DNS Version 1 namespace for use by DECnet-Plus. |  | | Log in to the new Version 2 clerk node under the SYSTEM account and invoke the sys$manager:decnet_register_decdns.com utility. |
|
http://www.cuis.edu/doc_vms_html/000000/731final/6496/6496pro_005.html
(2695 words)
|
|
| |
| | SourceForge.net: linux-decnet-user |
 | | Some of the fixes need back porting into 2.4 and I may get time to do that over the next few weeks, but its not an easy thing to do since so much has changed. |  | | It also brings into the DECnet code some bug fixes which were introduced into the ipv4 routing code after the DECnet routing code was split from it. |  | | I"ve got a patch against 2.5.67 which is rather large which fixes a number of issues which have been outstanding for some time. |
|
http://sourceforge.net/mailarchive/message.php?msg_id=4309822
(319 words)
|
|
| |
| | Network World: Alpha version of DECnet/OSI comes up to speed with VAX |
 | | Connector nodes include Digital's X25router 100 or 2000, DECNIS routers, DEC X.25gateway 100 or 500 and DECnet/OSI 5.7 for OpenVMS VAX systems configured with appropriate X.25 software. |  | | Logical connections can be made through what Digital calls connector nodes and relay nodes (see graphic). |  | | Connector nodes serve as gateways between DECnet local-area networks and X.25 packet nets, and use Digital's Gateway Access Protocol to forge links from DECnet network applications to the gateway. |
|
http://www.findarticles.com/p/articles/mi_qa3649/is_199405/ai_n8720614
(580 words)
|
|
| |
| | DECnet-Plus for OpenVMS |
 | | If you add an IDP, preDSP, or network area to your network, you must create new backtranslation directories. |  | | When you initialize the namespace for DECnet use, the tool creates backtranslation directories in the namespace for your network IDP and preDSP and for each network area that you specify. |  | | Because decnet_register can set up any access control required by DECnet, DIGITAL recommends that you use this tool (rather than the DECdns Control Program) to create the namespace directories you want to use for node names. |
|
http://www.cuis.edu/doc_vms_html/000000/731final/6499/6499pro_006.html
(2688 words)
|
|
| |
| | CERT Advisory CA-1991-17 DECnet-Internet Gateway Vulnerability |
 | | Even if you have not installed or are not running the DECnet- Internet gateway software, Digital recommends that you implement the workaround solution stated above. |  | | Also, ensure the guest account has the string "NoLogin" in the password field as detailed in the DECnet-Internet installation manual. |  | | The CERT/CC wishes to thank R. Scott Butler of the Du Pont Company for bringing this vulnerability to our attention and for his further assistance with the temporary workaround. |
|
http://www.cert.org/advisories/CA-1991-17.html
(415 words)
|
|
| |
| | Cotse - Connected: An Internet Encyclopedia - Ethernet Numbers |
 | | For example, DEC is assigned the vendor component 08-00-2B, so multicast addresses assigned by DEC have the first 24-bits 09-00-2B (since the multicast bit is the low-order bit of the first byte, which is "the first bit on the wire"). |  | | 800010 ATandT AA0000 DEC obsolete AA0001 DEC obsolete AA0002 DEC obsolete AA0003 DEC Global physical address for some DEC machines AA0004 DEC Local logical address for systems running DECNET ETHERNET MULTICAST ADDRESSES An Ethernet multicast address consists of the multicast bit, the 23-bit vendor component, and the 24-bit group identifier assigned by the vendor. |  | | DECsystem-20 08005A IBM 080067 Comdesign 080068 Ridge 080069 Silicon Graphics 08006E Concurrent Masscomp 080075 DDE (Danish Data Elektronik A/S) 08007C Vitalink TransLAN III 080080 XIOS 080086 Imagen/QMS 080087 Xyplex terminal servers 080089 Kinetics AppleTalk-Ethernet interface 08008B Pyramid 08008D XyVision XyVision machines 080090 Retix Inc Bridges 484453 HDS ??? |
|
http://www.cotse.com/CIE/RFC/1700/26.htm
(1278 words)
|
|
| |
| | TGV steers users off DECnet/OSI |
 | | We no longer have any particular reason to implement DECnet/OSI." |  | | Moreover, Digital and non-Digital users have adopted TCP/IP as the standard protocol for multivendor networking, and not Open Systems Interconnection, which is integral to DECnet/OSI. |  | | Most Digital users are already balking at migrating from DECnet Phase IV just to support current DECnet applications when upgrading the OpenVMS operating system. |
|
http://www.networkworld.com/archive/1994/94-08-22tgv_.html
(650 words)
|
|
| |
| | DECnet Protocols Suite - RP MOP NSP SCP DAP CTERM LAT STP LAVC |
 | | The Command Terminal (CTERM) protocol is the terminal emulation protocol of the Digital Network Architecture. |  | | The DECnet area and node given in the decimal dot form: Area.Node (where Area can extend from 1-63 and Node can extend from 1-1023). |  | | The Data Access Protocol (DAP) provides remote file access to systems supporting the DECnet architecture. |
|
http://www.protocols.com/pbook/decnet.htm
(1055 words)
|
|
| |
| | SourceForge.net: linux-decnet-user |
 | | In DECnet, there"s lines, circuits, and logical links. |  | | In IP, I thought the MTU applied to the physical layer, and segmentation in an IP network occurs lower in the protocol stack. |  | | Logical links are what processes set up and tear down, and I assume that"s where DECnet messages are segmented and handed down as packets to the circuit layer, and then to the line (physical) layer (except Ethernet bundles the line layer and the circuit layer into one). |
|
http://sourceforge.net/mailarchive/message.php?msg_id=5076972
(475 words)
|
|
| |
| | Security Vulnerabilities in DECnet/OSI for OpenVMS |
 | | Execute the following command to determine which version of DECnet you are currently running: |  | | If you are unable to install one of the above listed updates or ECOs, or if there is no ECO available for the version of DECnet that you are currently running, see the workaround described later. |
|
http://www.ciac.org/ciac/bulletins/f-04.shtml
(1016 words)
|
|
| |
| | Vulnerability in ULTRIX DECnet-Internet Gateway Software |
 | | It can only be exploited on ULTRIX V4.0, V4.1, and V4.2 machines running DECnet/ULTRIX with the DECnet gateway functionality enabled. |  | | To determine if your ULTRIX host running DECnet/ULTRIX is currently vulnerable, execute the command: /usr/bin/ncp show exec char Note: if your system doesn't have the file /usr/bin/ncp, it does not have DECnet/ULTRIX installed. |
|
http://ciac.llnl.gov/ciac/bulletins/b-43.shtml
(621 words)
|
|
|